manpages.info - online man pages   

SunOS man pages : rmail (1)

User Commands                                             mail(1)

NAME

mail, rmail - read mail or send mail to users

SYNOPSIS

Sending mail mail [ -tw ] [ -m message_type ] recipient ... rmail [ -tw ] [ -m message_type ] recipient ... Reading mail mail [ -ehpPqr ] [ -f file ] Debugging mail [ -x debug_level ] [ other_mail_options ] recipient ...

DESCRIPTION

A recipient is usually a user name recognized by login(1). When recipients are named, mail assumes a message is being sent. It reads from the standard input up to an end-of-file (CTRL-D) or, if reading from a terminal device, until it reads a line consisting of just a period. When either of those indicators is received, mail adds the letter to the mailfile for each recipient. A letter is composed of some header lines followed by a blank line followed by the message content. The header lines section of the letter consists of one or more UNIX post- marks: From sender date_and_time [remote from remote_system_name] followed by one or more standardized message header lines of the form: keyword-name: [printable text] where keyword-name is comprised of any printable, non- whitespace characters other than colon (`:'). A Content- Length: header line, indicating the number of bytes in the message content will always be present unless the letter consists of only header lines with no message content. A Content-Type: header line that describes the type of the message content (such as text, binary, multipart, etc.) will also be present unless the letter consists of only header lines with no message content. Header lines may be contin- ued on the following line if that line starts with white space. SunOS 5.8 Last change: 21 Feb 1995 1 User Commands mail(1)

OPTIONS

Sending mail The following command-line arguments affect sending mail: -m message_type A Message-Type: line is added to the message header with the value of message_type. -t A To: line is added to the message header for each of the intended recipients. -w A letter is sent to a remote recipient without waiting for the completion of the remote transfer program. If a letter is found to be undeliverable, it is returned to the sender with diagnostics that indicate the location and nature of the failure. If mail is interrupted during input, the message is saved in the file dead.letter to allow edit- ing and resending. dead.letter is always appended to, thus preserving any previous contents. The initial attempt to append to (or create) dead.letter will be in the current directory. If this fails, dead.letter will be appended to (or created in) the user's login directory. If the second attempt also fails, no dead.letter processing will be done. rmail only permits the sending of mail; uucp(1C) uses rmail as a security precaution. Any application programs that gen- erate mail messages should be sure to invoke rmail rather than mail for message transport and/or delivery. If the local system has the Basic Networking Utilities installed, mail may be sent to a recipient on a remote sys- tem. There are numerous ways to address mail to recipients on remote systems depending on the transport mechanisms available to the local system. The two most prevalent addressing schemes are UUCP-style and Domain-style. UUCP-style addressing Remote recipients are specified by prefixing the reci- pient name with the remote system name and an exclama- tion point, such as sysa!user. If csh(1) is the default shell, sysa\!user should be used. A series of system names separated by exclamation points can be used to direct a letter through an extended network (such as sysa!sysb!sysc!user or sysa\!sysb\!sysc\!user ). Domain-style addressing Remote recipients are specified by appending an `@' and domain (and possibly sub-domain) information to the recipient name (such as user@sf.att.com). (The local system administrator should be consulted for SunOS 5.8 Last change: 21 Feb 1995 2 User Commands mail(1) details on which addressing conventions are available on the local system.) Reading Mail The following command-line arguments affect reading mail: -e Mail is not printed. An exit status of 0 is returned if the user has mail; otherwise, an exit status of 1 is returned. -h A window of headers are initially displayed rather than the latest message. The display is followed by the ? prompt. -p All messages are printed without prompting for dispo- sition. -P All messages are printed with all header lines displayed, rather than the default selective header line display. -q mail terminates after interrupts. Normally an inter- rupt causes only the termination of the message being printed. -r Messages are printed in first-in, first-out order. -f file mail uses file (such as mbox) instead of the default mailfile. mail, unless otherwise influenced by command-line arguments, prints a user's mail messages in last-in, first-out order. The default mode for printing messages is to display only those header lines of immediate interest. These include, but are not limited to, the UNIX From and >From postmarks, From:, Date:, Subject:, and Content-Length: header lines, and any recipient header lines such as To:, Cc:, Bcc:, and so forth. After the header lines have been displayed, mail will display the contents (body) of the message only if it contains no unprintable characters. Otherwise, mail will issue a warning statement about the message having binary content and not display the content. (This may be overridden via the p command. See below.) For each message, the user is prompted with a ? and a line is read from the standard input. The following commands are available to determine the disposition of the message: # Print the number of the current message. - Print previous message. SunOS 5.8 Last change: 21 Feb 1995 3 User Commands mail(1) <new-line>,+, or n Print the next message. !command Escape to the shell to do command. a Print message that arrived during the mail session. d, or dp Delete the current message and print the next message. d n Delete message number n. Do not go on to next message. dq Delete message and quit mail. h Display a window of headers around current message. h n Display a window of headers around message number n. h a Display headers of all messages in the user's mail- file. h d Display headers of messages scheduled for deletion. m [ persons ] Mail (and delete) the current message to the named persons. n Print message number n. p Print current message again, overriding any indica- tions of binary (that is, unprintable) content. P Override default brief mode and print current message again, displaying all header lines. q, or CTRL-D Put undeleted mail back in the mailfile and quit mail. r [ users ] Reply to the sender, and other users, then delete the message. s [ files ] Save message in the named files (mbox is default) and delete the message. u [ n ] Undelete message number n (default is last read). w [ files ] Save message contents, without any header lines, in SunOS 5.8 Last change: 21 Feb 1995 4 User Commands mail(1) the named files (mbox is default) and delete the mes- sage. x Put all mail back in the mailfile unchanged and exit mail. y [ files ] Same as -w option. ? Print a command summary. When a user logs in, the presence of mail, if any, is usu- ally indicated. Also, notification is made if new mail arrives while using mail. The permissions of mailfile may be manipulated using chmod(1) in two ways to alter the function of mail. The other permissions of the file may be read-write (0666), read-only (0664), or neither read nor write (0660) to allow different levels of privacy. If changed to other than the default (mode 0660), the file will be preserved even when empty to perpetuate the desired permissions. (The adminis- trator may override this file preservation using the DEL_EMPTY_MAILFILE option of mailcnfg.) The group ID of the mailfile must be mail to allow new mes- sages to be delivered, and the mailfile must be writable by group mail. Debugging The following command-line arguments cause mail to provide debugging information: -x debug_level mail creates a trace file containing debugging infor- mation. The -x option causes mail to create a file named /tmp/MLDBGprocess_id that contains debugging information relating to how mail processed the current message. The absolute value of debug_level controls the verboseness of the debug information. 0 implies no debugging. If debug_level is greater than 0, the debug file will be retained only if mail encountered some problem while pro- cessing the message. If debug_level is less than 0, the debug file will always be retained. The debug_level speci- fied via -x overrides any specification of DEBUG in /etc/mail/mailcnfg. The information provided by the -x option is esoteric and is probably only useful to system administrators. SunOS 5.8 Last change: 21 Feb 1995 5 User Commands mail(1) Delivery Notification Several forms of notification are available for mail by including one of the following lines in the message header. Transport-Options: [ /options ] Default-Options: [ /options ] >To: recipient [ /options ] Where the "/options" may be one or more of the following: /delivery Inform the sender that the message was successfully delivered to the recipient's mailbox. /nodelivery Do not inform the sender of successful deliveries. /ignore Do not inform the sender of failed deliveries. /return Inform the sender if mail delivery fails. Return the failed message to the sender. /report Same as /return except that the original message is not returned. The default is /nodelivery/return. If contradictory options are used, the first will be recognized and later, conflict- ing, terms will be ignored.

OPERANDS

The following operand is supported for sending mail: recipient A user login name.

USAGE

See largefile(5) for the description of the behavior of mail and rmail when encountering files greater than or equal to 2 Gbyte ( 2**31 bytes).

ENVIRONMENT VARIABLES

See environ(5) for descriptions of the following environment variables that affect the execution of mail: LC_CTYPE, LC_MESSAGES, and NLSPATH. TZ Determine the timezone used with date and time strings. SunOS 5.8 Last change: 21 Feb 1995 6 User Commands mail(1)

EXIT STATUS

The following exit values are returned: 0 Successful completion when the user had mail. 1 The user had no mail or an initialization error occurred. >1 An error occurred after initialization.

FILES

dead.letter unmailable text /etc/passwd to identify sender and locate recipients $HOME/mbox saved mail $MAIL variable containing path name of mailfile /tmp/ma* temporary file /tmp/MLDBG* debug trace file /var/mail/*.lock lock for mail directory /var/mail/:saved directory for holding temp files to prevent loss of data in the event of a system crash /var/mail/user incoming mail for user; that is, the mailfile

ATTRIBUTES

See attributes(5) for descriptions of the following attri- butes: ____________________________________________________________ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | |_____________________________|_____________________________| | Availability | SUNWcsu | |_____________________________|_____________________________|

SEE ALSO

chmod(1), csh(1), login(1), mailx(1), uucp(1C), uuencode(1C), vacation(1), write(1), attributes(5), SunOS 5.8 Last change: 21 Feb 1995 7 User Commands mail(1) environ(5), largefile(5) OpenWindows Advanced User's Guide

NOTES

The interpretation and resulting action taken because of the header lines described in the Delivery Notifications section above will only occur if this version of mail is installed on the system where the delivery (or failure) happens. Ear- lier versions of mail may not support any types of delivery notification. Conditions sometimes result in a failure to remove a lock file. After an interrupt, the next message may not be printed; printing may be forced by typing a p. SunOS 5.8 Last change: 21 Feb 1995 8